Polymer Centre

Research

The Polymer Centre closely cooperates with the University Institute.

Research teams of Polymer Centre and of the Centre of Polymer Systems
List of instruments
List of projects carried out by the Polymer Centre in 2012
Annual reports
Publications in 2012

Research teams of the Polymer Centre and the Centre of Polymer Systems

Director of the research teams: Doc. Dr. Ing. Vladimír Pavlínek, Director of the Centre of Polymer Systems

Research programme I. ‘Advanced Processing of Progressive Polymer Systems’:
Leader of the research programme I.: Prof. Ing. Martin Zatloukal, Ph.D.

Research specialization: Preparation of multilayer profiles with controlled properties

Senior researcher: Doc. Ing. Roman Čermák, Ph.D.
Junior researchers: Ing. Martina Polášková, Ph.D., Doc. Ing. Jiří Maláč, CSc., Doc. Ing. Petr Hlaváček, CSc., Ph.D., Ing. Alena Kalendová, Ph.D., Ing. Lubomír Beníček, Ph.D., M. Sc. Andrés Bernal Ballén, Ph.D, Ing. Miroslav Pastorek, Ing. Zuzana Dujková , Ing. Lenka Chvátalová, Ph.D., Doc. Ing. Dagmar Měřínská, Ph.D., Ing. Miroslav Janíček

Research specialization: Modelling of advanced polymer processing technologies

Senior researcher: Prof. Ing. Martin Zatloukal, Ph.D.
Junior researchers: Prof. Ing. Vladimír Bobál, CSc., Prof. Ing. Petr Dostál, CSc., Ing. Adriana Knápková, Ph.D., M. Sc. Wannes Sambaer Ph.D., Ing. Roman Kolařík, Ph.D, Ing. Jan Musil, Ph.D.

Research specialization: Packaging materials for medical, pharmaceutical and food application

Senior researcher: Ing. Tomáš Sedláček, Ph.D.
Junior researchers: Prof. Pavel Škarka, M.F.A, Doc. Ing. Věra Kašpárková, CSc., Prof. Dr. Ing. Drahomíra Pavelková, Ing. Tomáš Sáha, Ph.D., Ing. Michaela Pelíšková, Ph.D., Ing. Pavel Urbánek, M. Eng. Pongprapaat Piyamanocha, Ing. Ondřej Hudeček, Ing. Daniela Veselá, Ph.D., M. Sc. Saarai Amarjargal, Ph.D., Bc. Robert Mostýn, Ing. Jakub Sedlák, Ing. Tomáš Plachý, Ing. Jiří Kalous, Ing. Jakub Kadlčák

Research specialization: Preparation of bioactive polymer systems

Senior researcher: Doc. Ing. Marián Lehocký, Ph.D.
Junior researchers: Doc. M. Sc. Nabanita Saha, Ph.D., Doc. Ing. Pavel Valášek, CSc., Doc. Ing. Vladimír Sedlařík, Ph.D., Ing. Zuzana Kolářová, Ph.D., Ing. Petr Humpolíček, Ph.D., Rostislav Illík, M.F.A, Doc. Mgr. Marek Koutný, Ph.D., Doc. RNDr. Jan Růžička, Ph.D., Ing. Lenka Jelínková, Ph.D., Doc. Ing. Pavel Mokrejš, Ph.D., Ing. Markéta Julinová, Ph.D., Ing. František Bílek, Ing. Veronika Struhařová, Ing. Lucie Husárová, M. Sc. Jorge Lopez, Ing. Pavel Kucharczyk, Bc. Jana Bartošová, M. Sc. Martha Merchán Merchán, Ph.D., Ing. Zdenka Kuceková, Ing. Petr Stloukal

Research programme II. ‘Preparation of Advanced Polymer Composite Systems’:
Leader of the research programme II.: Doc. Ing. et Ing. Ivo Kuřitka, Ph.D. et Ph.D.

Research specialization: Injection moulding of highly filled polymers

Senior researcher: Prof. Ing. Berenika Hausnerová, Ph.D.
Junior researchers: Prof. Takeshi Kitano, Ph.D., Doc. Ing. Petr Svoboda, Ph.D., Doc. Ing. Zdeněk Dvořák, CSc., Ing. Lucie Čučová, Ing. Rostislav Tupý, Ing. Gordana Paravanová, Ph.D., Ing. Daniel Sanétrník

Research specialization: Multifunctional polymer nanomaterials

Senior researcher: Doc. Ing. Petr Slobodian, Ph.D.
Junior researchers: Ing. Michal Machovský, Mgr. Aleš Mráček, Ph.D., Ing. Antonín Minařík, Ph.D., Ing. Petr Smolka, Ph.D., Prof. Ing. Lubomír Lapčík, CSc., Doc. Mgr. Barbora Lapčíková, Ph.D., Ing. Robert Olejník, Ing. Zuzana Kožáková, Ing. Pavel Bažant, M.Sc. Ruhan Benlikaya, Ing. Lenka Gřundělová, Ing. Petr Krčmář, Ing. Magda Rafajová, Ing. Eliška Rajnohová

Research specialization: Preparation of hybrid composites for microwave absorbers

Senior researcher: Doc. Ing. Natalia Kazantseva, Ph.D.
Junior researchers: Prof. Ing. Petr Sáha, CSc., Doc. Ing. Jarmila Vilčáková, Ph.D., Ing. Martin Stěnička, Ph.D., Ing. Robert Moučka, Ph.D., Doc. RNDr. Petr Ponížil, Ph.D., Mgr. Eva Straňáková, Doc. Ing. Anežka Lengálová, Ph.D., Ing. Michal Sedlačík, M. Sc. Vladimir Babayan, Ph.D., Ing. Miroslav Mrlík, Ing. Jiří Jaroš, Ing. Lenka Kutějová

List of instruments

Rosand RH7-2 (Great Britain)
High-pressure capillary viscometer
Measuring of tensile and physical properties of polymer melts

Rheograph Göttfert 2001 (Germany)
High-pressure capillary viscometer

Rheometrics ARES (USA)
Rotational viscometer

Brabender Plasti-Corder (Germany)
Drive unit incl. accessories (mixer, planetary mixer, single worm extruder, double worm extruder)

Perkin Elmer Pyris 1 DSC (USA)
Differential scanning calorimeter

E4991A RF Impedance/Material Analyzer (USA)
Impedance material analyzer with accessories for measuring of dielectric properties of composite systems

N5230A PNA-L Network Analyzer (USA)
Vector analyzer incl. accessories for measuring of dielectric properties of liquid and solid materials

LAB-EHY-100 SA, Oncotherm (Hungary)
Device for measuring of hyperthermic heating

KEITHLEY 2410 and 6517A (USA)
Programmable multimeters

Trek 668 B-H w/IEEE (USA)
Source of high voltage direct current, 3 kV, 5 mA

Steam sterilizer Tuttnauer 3870 M (Germany)
Table top autoclave for sterilization of tools and laboratory glassware

Incubator Memmert BE 500 (Germany)

Laminar work box BDK (Germany)

Retsch SM 100 (Germany)
Cutting mill

Muffle furnace LAC LMH 07/12 (USA)
Laboratory furnace with a programmable controller

Retsch AS 200 (Germany)
Sieve shaker for wet and dry sieving of materials (0.02 to 25 mm)

UP 400S (Germany)
Ultrasonic homogenizer

Fluorimeter FSL 920 Edinburgh (Great Britain)
Red-sensitive single photon counting detector, steady-state and life-time measuring of photoluminescence of liquid and solid samples, cryostat Oxford Instruments, polarizing filters

TG – Setaram SetSys Evolution 1200 + DigiLab FT IR spectrometer Excalibur 3 000 + mass spectrometer AVX 600 (France)
TG analysis up to 1,200 °C connected with EGA (evolved gas analysis) of gas products of atmosphere samples exposed to heat stress: He, air

CD DIGITAL TESTER - QC – CDD 40 (Czech Republic)
CD media tester

Rheometer Bohlin Gemini CVOR 150 CE/WIN, Malvern Instruments (Great Britain)
Rotational viscometer with electrorheological cell

INSTRON 8870, Instron (Great Britain)
Servohydraulic fatigue testing machine

ZWICK 5113, Zwick (Germany)
Tensile machine

Zetasizer Nano ZS, Malvern Instruments (Great Britain)
Particle size analyzer, measuring of zeta potential

HPLC, BREEZE system, UV-VIS detector, Waters (USA)
Liquid chromatograph

Helios Gamma, Thermo Scientific (USA)
UV-VIS spectrometer

DMA/SDTA861e, Mettler Toledo (Switzerland)
Dynamic thermomechanical analyzer

Set of manual lab presses

MEt 180III, Mitsubishi (Japan)
Injection molding machine

GM 251, GDK s r.o. (Czech Republic)
Automatic blowing machine

Babyplast 6/10P, Cronoplast S. L. (Italy)
Micro injection molding machine

KETSE 20/40, Brabender GmbH (Germany)
Double worm extruder

EB 30 and EB 25, BOCO PARDUBICE s r.o. (Czech Republic)
Single worm extruders

Cooling three-roll calender machine 35/20 (Czech Republic)

VEGA II LMU, Tescan (Czech Republic)
Raster electron microscope working in high- and low-vacuum mode, detectors BSE, SE, LVSTD, CL, EDX; TE detector also enables work in STEM mode

VIBRATION MAGNETOMETER, LAKE SHORE Model 7407 (USA)
Vibration magnetometer for measuring in a static magnetic field

Arburg Allrounder 370S (Germany)
Injection machine for processing of highly filled polymer compounds

MW Laboratory system, RADAN s.r.o. (Czech Republic)
Microwave synthesis in an open system

Mars 5, CEM Corporation (USA)
Microwave synthesis in a closed system

4294A (40 Hz-110 MHz) RF Impedance/Material Analyzer (USA)
Impedance material analyser with accessories for measuring of dielectric properties of composite systems

FTIR spectrometer Nicolet iS5 (USA)
Including ATR and DRIFT accessories for measuring of IR spectra of solid, liquid and powder samples

Rheometer Visco 88 Cone and Plate including standard accessories (Great Britain)
Viscometer for measuring of viscosity of liquids

Spectrophotometer RT850i including accessories (Germany)
Calorimeter for colour measurement

DSC 1, Mettler Toledo (Switzerland)
Differential scanning calorimeter)

Vector peripheral analyser E5071C incl. accessories, Agilent (USA)
Measuring of dielectric and magnetic parameters through transfer through a coaxial air line and resonators in the field of frequencies (100 kHz – 8.5 GHz)

Generator 33512A, Agilent (USA)
Single-channel generator working up to 30MHz

Amplifier 800A3A , AR Microwave/Instrumentation
(Output of 800 W, 10 kHz - 3 MHz)

Educational software DIGIMAT

Bath thermostat CC-308 B Pilot ONE HUBER

List of projects carried out by the Polymer Centre in 2012

Centre of Polymer Systems (2011-2014) – project implemented by UNI, FT, FAI, FMC and FaME
MEYS CZ.1.05/2.1.00/03.0111
Project investigator: Prof. Ing. P. Sáha, CSc. – until 30 June 2011
Doc. Dr. Ing V. Pavlínek – from 1 July 2011

Smart fluids and composites with tunable structure (2009-2013)
GA CR 202/09/1626
Project investigator: Doc. Dr. Ing. V. Pavlínek

Analysis and development of constitutive equations for description of non-Newtonian fluids (2009-2013)
GA CR 103/09/2066
Project investigator: Prof. Ing. M. Zatloukal, Ph.D.

Applied rheology for advanced polymer processing (2010-2014)
GA CR P108/10/1325
Project investigator: Prof. Ing. M. Zatloukal, Ph.D.

Study of polylactide based material for packaging applications (2009-2012)
Kontakt CR-China (MEYS ME09072)
Project investigator: Prof. Ing. P. Sáha, CSc.
Sichuan University, The State Key Laboratory of Polymer Materials Engineering, Chengdu, China

Research and development of functional properties of components of passive safety of automobile vehicle passengers using innovative polymeric materials and production technologies (2011-2014)
TA - Programme of applied research and experimental development ALFA (TA01011211)
Project co-investigator: Ing. T. Sedláček, Ph.D.
INDET SAFETY SYSTEMS a.s.,Vsetín, CR

Innovation in the Process of Development of Adhesives and Laminating Compounds Based on Reactoplastics through Knowledge Transfer (2010-2012)
Pilot project MIT Knowledge transfer partnership
Guarantor: Doc. Dr. Ing. V. Pavlínek
5M s r.o., Kunovice, CR (Knowledge transfer assistant – Mgr. E. Straňáková)

New functionalized polymers of lactic acid for biocomposite preparation (2011-2012)
Kontakt mobility: Czech Republic - Austria (MEB061102)
Project investigator: Doc. Ing. V. Sedlařík, Ph.D.

Innovation and Education in Polymer Technologies and Applications (2010-2013)
Operational programme “Education for Competitiveness” (CZ.1.07/2.2.00/15.0363)
Project investigator: Doc. Ing. et Ing. I. Kuřitka, Ph.D. et Ph.D.

Development and Application of Methodology for Research into Properties of Microspheres Based on Newly Synthesized Biodegradable Block Co-Polymers
TBU Internal Grant Agency (IGA/FT/2012/005)
Project investigator: Ing. P.Kucharczyk, Guarantor: Doc. Ing. V. Sedlařík, Ph.D.

Sensor Element for Human Movement Detection Based on Network of Loosely Woven Carbon Nanotubes on Polymer Plate
TBU Internal Grant Agency (IGA/FT/2012/022)
Project investigator: Ing. D. Petráš, Guarantor: Doc. Ing. P. Slobodian, Ph.D.

Development of Multi-Component Polymer System Based on Epoxide and Silicon
TBU Internal Grant Agency (IGA/FT/2012/024)
Project investigator: Ing. L.Kutějová, Guarantor: Doc. Ing. J.Vilčáková, Ph.D.

Modified Polymer Materials for Thin Films
TBU Internal Grant Agency (IGA/FT/2012/025)
Project investigator: Ing. P. Urbánek, Guarantor: Doc. Ing. et Ing. I. Kuřitka, Ph.D. et Ph.D.

Effect of bioactive substances on hypertermia treatment
TBU Internal Grant Agency (IGA/FT/2012/029)
Project investigator: Ing. Z. Kuceková, Guarantor: Prof. Ing. P. Sáha, CSc.

Synthesis and characterization of iron oxide based nanocomposites for application in magnetic mediated hyperthermia
TBU Internal Grant Agency (IGA/FT/2012/033)
Project investigator: M. Sc. I. S. Stepanova, Guarantor: Doc. Ing. N. Kazantseva, Ph.D.

Use of Microwave Synthesis for Preparation of Materials for Smart Applications
TBU Internal Grant Agency (IGA/FT/2012/039)
Project investigator: Ing. M. Mrlík, Guarantor: Doc. Dr. Ing. V. Pavlínek

Composite Materials with Controlled Release of Active Species
TBU Internal Grant Agency (IGA/FT/2012/042)
Project investigator: Ing. J. Sedlák, Guarantor: Doc. Ing. et Ing. I. Kuřitka, Ph.D. et Ph.D.

Electroluminescent Foils for Safety Interior Lighting (2011-2014)
Project submitted to MIT CR – “TIP” FR-TI3/424
Project investigator: Doc. Ing. et Ing. I. Kuřitka, Ph.D. et Ph.D.
NWT, a.s. Hulín, ČR

Projects submitted in 2012

GA CR – Grant Agency of the Czech Republic

Characteristics of adsorption mechanisms, electrical conductivity and deformation of polymer nanocomposites based on functionalized carbon nanotubes
Project submitted to GA CR
Project investigator: Doc. Ing. P. Slobodian, Ph.D.

Antimicrobial modifications of hydrophilic polymers and study of their interaction with hydrophobic matrixes - Project submitted to GA CR
Project investigator: Doc. Ing. V. Sedlařík, Ph.D.

Conductive Polymers and Their Interaction with Cells
Project submitted to GA CR
Project investigator: Ing.Petr Humpolíček, Ph.D.

Electric and Dielectric Properties of Expanded Conductive Polymer Composites: Dependence on Structural and Other Physical Parameters
Project submitted to GA CR
Project investigator: Ing. Michaela Pelíšková, Ph.D.

Synthesis, characterization and processing of star-shape biodegradable copolymers
Project submitted to GA CR
Project investigator: Doc. Ing. V. Sedlařík, Ph.D.

7th EU Framework Programme

A flexible and sustainable packaging technology based on biodegradable bio-sourced plastics incorporating antioxidant and antibacterial additives and TTI for fish based food products (4 years)
Project: Collaborative Project (small or medium-scale focused research project targeted to SMEs Work) submitted on 25 February 2011
Project investigator: Doc. MSc. N. Saha, Ph.D.

Bioresponsive systems based on flexible and sustainable hydrogels food packaging (5 years)
Project: ERC Advanced Grant 2012 (Submitted on 14 March 2012)
Project investigator: Doc. MSc. N. Saha, Ph.D.

MEYS – Ministry of Education, Youth and Sports – submitted projects

Microwave Heating and Packaging Materials
Project submitted to the Higher Education Development Fund - G
Project investigator: Ing. P. Bažant

Development of Magnetic Materials for Hyperthermia Cancer Treatment
Kontakt project CR-Russian Federation (LH11119)
Project investigator: Doc. Ing. N. Kazantseva, Ph.D.

Preparation of Optimization of Microbial Cellulose for Biomedical Applications
MEYS project VES 13 Kontakt II (LH) CR-India
Project investigator: Doc. MSc. N. Saha, Ph.D.

Development of Biopolymers for Medical Applications
MEYS project VES 13 Kontakt II (LH) CR-India
Project investigator: Doc. MSc. N. Saha, Ph.D.

Biopolymer Superabsorbent Hydrogels: Their Application in Medicine, Agriculture and Food Packaging
MEYS project VES 13 Kontakt II (LH) CR-India
Project investigator: Doc. MSc. N. Saha, Ph.D.

Preparation of Magnetically Active Biocompatible Systems
Project: 7AMB-MOBILITY
Project investigator: Doc. Ing. Dr. V.Pavlínek

Introduction of New Techniques in the Course Unit “Applied Biology and Cell Cultures”
Project submitted to the Higher Education Development Fund, MEYS CR
Project investigator: Ing. P. Humpolíček, Ph.D.

Support of Innovation in the Course Unit “Polymers and Environment”
Project submitted to the Higher Education Development Fund
Project investigator: Doc. Ing. V. Sedlařík, Ph.D.

MEYS – Ministry of Education, Youth and Sports – projects in implementation

Innovation of a Laboratory of Electromagnetic Properties – in implementation
Project submitted to the Higher Education Development Fund - A
Project investigator: Doc. Ing. J. Vilčáková, Ph.D.

Effect of Conductivity on Dielectric and Magnetic Properties of Hybrid Polymer Composites (2012-2013) – in implementation
Slovak Research and Development Agency - Mobility project, within bilateral cooperation between Slovakia and the Czech Republic (SK-CZ-0174-11)
Project investigator: Ing. R. Moučka, Ph.D.

TACR – Technology Agency of the Czech Republic

Surface Treatment of Plastics through Atmospheric Plasma
TACR, ALFA programme (2012-2014) TA02011086
Project co-investigator: Ing. T. Sedláček, Ph.D.
Plastics Cluster

1^stimplementation stage - Centre of Advanced Polymer and Composite Materials
TACR, programme of the Technology Agency of the Czech Republic aimed to support the development of long-term cooperation in research, development and innovations between the public and the private sector 'Competence Centres' (2012-2019) TE01010216
Project investigator: Prof. Ing. P. Sáha, CSc.

2^ndimplementation stage - Centre of Advanced Polymer and Composite Materials
TACR, programme of the Technology Agency of the Czech Republic aimed to support the development of long-term cooperation in research, development and innovations between the public and the private sector 'Competence Centres' (2012-2019) TE01010216
Project investigator: Prof. Ing. P. Sáha, CSc.

Annual reports

2012 [323 KiB]
2011 [383 KiB]
2010 [106 KiB]

Publications in 2012

Papers in scientific publications

Publications in indexed journals

1. SEDLACIK, M., MRLIK, M., PAVLINEK, V., SAHA, P., QUADRAT, O.: Electrorheological properties of suspensions of hollow globular titanium oxide/polypyrrole particles. Colloid and Polymer Science, 2012, vol. 290, p. 41-48, ISSN 0303-402X. Type - Jimp
2. SEDLACIK, M., PAVLINEK, V., LEHOCKY, M., JUNKAR, I., VESEL, A.: Plasma-enhanced chemical vapour deposition of octafluorocyclobutane onto carbonyl iron particles. Materials and Technology, 2012, vol. 46, p. 43-46, ISSN 1580-2949. Type - Jimp
3. POPELKA, A., NOVAK, I., LEHOCKY, M. CHODAK, I., SEDLIACIK, J., GAJTANSKA, M., SEDLIACIKOVA, M., VESEL, A., JUNKAR, I., KLEINOVA, A., SPIRKOVA, M., BILEK, F.: Anti-bacterial Treatment of Polyethylene by Cold Plasma for Medical Purposes. MOLECULES, 2012, vol. 17, p. 762-785, ISSN 1420-3049 Type - Jimp
4. MRLIK, M., PAVLINEK, V., CHENG, Q., SAHA, P.: Synthesis of Titanate/Polypyrrole Composite Rod-Like Particles and the Role of Conducting Polymer on Electrorheological Efficiency. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2012, vol. 26 (2), p. 1 - 8, ISSN 0217-9792 Type - Jimp
5. SEDLACIK, M., PAVLINEK, V., SAHA, P., SVRCINOVA, P., FILIP, P.: The role of particles annealing temperature on magnetorheological effect. Modern Physics Letters B, 2012, vol. 26 (3), art. number 1150013, ISSN 0217-9849. Type - Jimp
6. BABAYAN, V., KAZANTSEVA, N. E., MOUČKA, R., SAPURINA, I., SPIVAK, Yu.M., MOSHNIKOV, V. A.: Combined effect of demagnetizing field and induced magnetic anisotropy
on the magnetic properties of manganese–zinc ferrite composites. Journal of Magnetism and Magnetic Materials, 2012, vol. 324 (2), p. 161-172, ISSN 0304-8853. DOI: 10.1016/j.jmmm.2011.08.002. Type – Jimp
7. KUCHARCZYK, P., SEDLARIK, V., JUNKAR, I., KREUH, D., SAHA, P.: ENHANCEMENT OF MOLECULAR WEIGHT OF L-LACTIC ACID POLYCONDENSATES UNDER VACUUM IN SOLID STATE Materiali in Tehnologije, 2012, vol. 46 (1), p. 37-41, ISSN 1580-2949. Type - Jimp
8. KUCHARCZYK, P., SEDLARIK, V., MISKOLCZI, N., SZAKACS, H., KITANO, T.: Properties enhancement of partially biodegradable polyamide/polylactide blends through compatibilization with novel polyalkenyl-poly-maleic-anhydrideamide/imide-based additives. Journal of Reinforced Plastics and Composites, vol. 31(3), p. 189–202, ISSN 0731-6844. Type - Jimp
9. HUMPOLICEK, P., KASPARKOVA, V., SAHA, P., STEJSKAL, J.: Biocompatibility of polyaniline. Synthetic Metals, 2012, vol. 162 (7-8), p. 722-727, ISSN 0379-6779 doi:10.1016/j.synthmet.2012.02.024 Type - Jimp
10. ROY, N., SAHA, N., KITANO, T., LEHOCKY, M., VITKOVA, E., SAHA, P.: Significant Characteristics of Medical-Grade Polymer Sheets and their Efficiency in Protecting Hydrogel Wound Dressings: A Soft Polymeric Biomaterial. International Journal of Polymeric Materials, 2012, vol. 61, p. 72-88, ISSN 0091-4037. Type - Jimp
11. KOLARIK, R., ZATLOUKAL, M., TZOGANAKIS, C.: Stability analysis of non-isothermal film blowing process for non-Newtonian fluids using variational principles. Chemical Engineering Science, 2012, vol. 73, p. 439-453, ISSN 0009-2509. Type - Jimp
12. BABAYAN, V., KAZANTSEVA, N. E., SAPURINA, I., MOUCKA, R., VILCAKOVA, J., STEJSKAL, J.: Magnetoactive feature of in-situ polymerised polyaniline film developed on the surface of manganese-zinc ferrite. Applied Surface Science, 2012, vol. 258, no. 19, p. 7707-7716, ISSN 0169-4332, DOI: 10.1016/j.apsusc.2012.04.126. Type - Jimp
13. CHENG, Q. L., XIA, Y. M., PAVLINEK, V., YAN, Y. F. , LI, C. Z., SAHA, P..: Effects of macropore size on structural and electrochemical properties of hierarchical porous carbons. Journal of Materials Science, 2012, vol. 47, no. 17, p. 6444-6450, ISSN 0022-2461, DOI: 10.1007/s10853-012-6576-y. Type – Jimp
14. HUMPOLICEK, P., KASPARKOVA, V., STEJSKAL, J., KUCEKOVA, Z., SEVCIKOVA, P.: Cell Proliferation on a Conducting Polymer (Polyaniline). Chemicke Listy, 2012, vol. 106, no. 5, p. 380-383, ISSN 0009-2770, DOI: none. Type - Jimp
15. ROY, N., SAHA, N., KITANO T., SAHA, P..: Biodegradation of PVP-CMC hydrogel film: A useful food packaging material. Carbohydrate Polymers, 2012, vol. 89, no. 2, p. 346-353, ISSN 0144-8617, DOI: 10.1016/j.carbpol.2012.03.008. Type - Jimp
16. SEDLARIK, V., OTGONZUL, O., KITANO, T., GREGOROVA, A., HRABALOVA, M., JUNKAR, I., CVELBAR, U., MOZETIC M., SAHA, P.: Effect of Phase Arrangement on Solid State Mechanical and Thermal Properties of Polyamide 6/Polylactide Based Co-polyester Blends. Journal of Macromolecular Science Part B-Physics, 2012, vol. 51, no. 5, p. 982-1001, ISSN 0022-2348, DOI: 10.1080/00222348.2011.610265. Type - Jimp
17. STLOUKAL, P., KUCHARCZYK, P., SEDLARIK, V., BAZANT, P. KOUTNY, M.: Low Molecular Weight Poly(lactic acid) Microparticles for Controlled Release of the Herbicide Metazachlor: Preparation, Morphology, and Release Kinetics. Journal of Agricultural and Food Chemistry, 2012, vol. 60, no. 16, p. 4111-4119, ISSN 0021-8561, DOI: 10.1021/jf300521j. Type - Jimp
18. YAN, Y. F., CHENG, Q. L., PAVLINEK, V., SAHA, P., LI, C. Z.: Fabrication of polyaniline/mesoporous carbon/MnO2 ternary nanocomposites and their enhanced electrochemical performance for supercapacitors. Electrochimica Acta, 2012, vol. 71, p. 27-32, ISSN 0013-4686, DOI: 10.1016/j.electacta.2012.03.101. Type – Jimp
19. SLOBODIAN, P., RIHA, P., SAHA, P.: A highly-deformable composite composed of an entangled network of electrically-conductive carbon-nanotubes embedded in elastic polyurethane. Carbon, 2012, vol. 50, no. 10, p. 3446-3453, ISSN 0008-6223, DOI: 10.1016/j.carbon.2012.03.008. Type – Jimp
20. OLEJNIK, R., SLOBODIAN, P., RIHA, P., SAHA, P.: An electrically conductive and organic solvent vapors detecting composite composed of an entangled network of carbon nanotubes embedded in polystyrene. Journal of Nanomaterials, 2012, vol. 2012, Article number 365062, ISSN 1687-4110, DOI: 10.1155/2012/365062. Type – Jimp
21. SVOBODA, P., THERAVALAPPIL, R., POONGAVALAPPIL, S., VILCAKOVA, J., SVOBODOVA, D., MOKREJS, P., BLAHA, A.: A study on electrical and thermal conductivities of ethylene-octene copolymer/expandable graphite composites. Polymer Engineering and Science, 2012, vol. 52, no. 6, p. 1241-1249, ISSN 0032-3888, DOI: 10.1002/pen.22192. Type – Jimp
22. OLEJNIK, R., SLOBODIAN, P., RIHA, P., MACHOVSKY, M.: Increased sensitivity of multiwalled carbon nanotube network by PMMA functionalization to vapors with affine polarity. JOURNAL OF APPLIED POLYMER SCIENCE, 2012, vol. 126, p. 21-29, ISSN 1097-4628, DOI: http://dx.doi.org/10.1002/app.36366. Type - Jimp
23. MUSIL, J., ZATLOUKAL, M.: Experimental investigation of flow induced molecular weight fractionation phenomenon for two linear HDPE polymer melts having same Mn and Mw but different Mz and Mz+1 average molecular weights. Chemical Engineering Science, 2012, vol. 81, p. 146-156, ISSN 0009-2509, DOI: http://dx.doi.org/10.1016/j.ces.2012.06.049. Type - Jimp
24. SAMBAER, W., ZATLOUKAL, M., KIMMER, D.: 3D air filtration modeling for nanofiber based filters in the ultrafine particle size range. Chemical Engineering Science, 2012, vol. 82, p. 299-311, ISSN 0009-2509, http://dx.doi.org/10.1016/j.ces.2012.07.031. Type - Jimp
25. SOUKUP, K., PETRAS, D., TOPKA, P., SLOBODIAN, P., SOLCOVA, O.: Preparation and characterization of electrospun poly(p-phenylene oxide) membranes. CATALYSIS TODAY, 2012, vol. 193(1), p. 165-171, ISSN: 0920-5861, DOI: http://dx.doi.org/10.1016/j.cattod.2012.03.019. Type - Jimp
26. KUCHARCZYK, P., POLJANSEK, I., SEDLARIK, V.: The Effect of Various Catalytic Systems on Solid-State Polymerization of Poly-(L-lactic acid). Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 2012, vol. 49, p. 795 - 805, ISSN: 1060-1325, DOI: http://dx.doi.org/10.1080/10601325.2012.714312. Type - Jimp
27. SAARAI, A., SEDLACEK, T., KASPARKOVA, V., KITANO, T., SAHA, P.: On the Characterization of Sodium Alginate/Gelatine-Based Hydrogels for Wound Dressing. JOURNAL OF APPLIED POLYMER SCIENCE, 2012, vol. 126, p. 79-88, ISSN 1097-4628, DOI: http://dx.doi.org/10.1002/app.36590. Type - Jimp
28. STENICKA, M., PAVLINEK, V., SAHA, P., BLINOVA, N. V., STEJSKAL, J., QUADRAT, O.: The effect of compatibility of suspension particles with the oil medium on electrorheological efficiency. Journal of Intelligent Material Systems and Structures, 2012, vol. 23 (9), p. 1055 - 1059, ISSN: 1045-389X, DOI: http://dx.doi.org/10.1177/1045389X11429173. Type - Jimp
29. STENICKA, M., PAVLINEK, V., PONIZIL, P., KITANO, T., SAHA, P.: A note on secondary electrorheological patterns. Journal of Intelligent Material Systems and Structures, 2012, vol. 23 (9), p. 1061 - 1066, ISSN: 1045-389X, DOI: http://dx.doi.org/10.1177/1045389X12443595. Type - Jimp
30. GREGOROVA, A., RIEDL, E., SEDLARIK, V., STELZER, F.: Effect of 4,4'-methylenediphenyl diisocyanate on thermal and mechanical properties of Bioflex/lactic acid polycondensate blends. Asia-Pacific Journal of Chemical Engineering, 2012, vol. 7 (3), p. S317-S323, ISSN: 1932-2135, DOI: http://dx.doi.org/10.1002/apj.1650. Type - Jimp
31. VILCAKOVA, J.; MOUCKA, R.; SVOBODA, P.; ILCKOVA, M.; KAZANTSEVA, N.; HRIBOVA, M.; MICUSTIK, M.; OMASTOVA, M.: Effect of Surfactants and Manufacturing Methods on the Electrical and Thermal Conductivity of Carbon Nanotube/Silicone Composites. Molecules 2012, 17, p. 13157-13174.
32. KUCHARCZYK, P. OTGONZUL, O. KITANO, T. GREGOROVA, A. KREUH, D. CVELBAR, U. SEDLARIK, V. SAHAP. Correlation of morfology and viscoelastic properties of partially biodegradable polymer blends based on polyamide 6 and polylactide copolyester. Polymer-Plastics Technology and
Engineering, 2012, 51, p. 1432-1442. Type - Jimp
33. SAMBAER, W., ZATLOUKAL, M., KIMMER, D., SAHA, P.: Production and characterization of medical nanofiber based filters. Medical Plastics 2012, Copenhagen, Denmark, Ed. Hroar R. Skov, Hexagon Holding ApS. ISBN 87-89753-65-8.
34. KIMMER, D., FENYK, J., ZATLOUKAL, M., SLOBODIAN, P., BARABASZOVA, K., C.: Dispergation of vermiculites in polymer matrix and elected property characterization of prepared nanocomposites. NANOCON 2012, Brno, TANGER Ltd., ISBN 978-80-87294-32-1.
35. KIMMER, D., VINCENT, I., FENYK, J., PETRAS, D., ZATLOUKAL, M., SAMBAER, W., ZDIMAL, V.: Morphology of nanofiber structures in ultrafine particles filtration. In: 11th World Filtration Congress, April 16-20, 2012, Graz, Austria, ISBN 978-3-941655-05-8.
36. PELÍŠKOVÁ, M. SÁHA, P.: Vliv lehčené struktury na elektrické vlastnosti polymerních kompozitů s elektrovodnými plnivy. Chemické listy 2012, 106, p. 1104-1109.
37. ROP, O. REZNÍČEK, V. MLCEK, J. JURIKOVÁ, T. SOCHOR, J. KIZEK, R. HUMPOLICEK, P. BALÍK, J.: Nutritional values of new Czech cultivars of Saskatoon berries (Amelanchier alnifolia Nutt.), Horticultural Science 2012, 39, 3, p. 123–128.
38. HUMPOLICEK, P. TVRDON, Z. JAROS J.: Impact of wean to standing reflex interval on litter size of sows. Archiv Tierzucht. Archiv Tierzucht 55 2012, 2, p 148-151.
39. KOMPAN, M. E., SAPURINA, I. Yu., BABAYAN, V., KAZANTSEVA, N. E. Electrically conductive polyaniline – a molecular magnet with the possibility of chemically controlling the magnetic properties. Physics of the Solid State 2012, vol. 54, no. 12, p. 2412-2418, ISSN: 10637834, DOI: 10.1134/S1063783412120190. Type–Jimp.
40. OLEJNIK, R., SLOBODIAN, P., SAHA, P.: Sensing Element Made of Multi-Wall Carbon Nanotube Network for Organic Vapor Detection, Key Engineering Materials, Vol. 495, pp 9-12, 2012, DOI:10.4028/www.scientific.net/KEM.495.9.
41. MATEJIK, D., OLEJNIK, R., SLOBODIAN, P., SAHA, P.: Improved Selectivity of Oxidized Multiwall Carbon Nanotube Network for Detection of Ethanol Vapors, Key Engineering Materials, Vol. 495, pp 9-12, 2012,DOI:10.4028/www.scientific.net/KEM.495.83
42. LENGALOVA, A., OLEJNIK, R., SLOBODIAN, P., RIHA, P.: A pressure sensing conductive polymer composite with carbon nanotubes for biomechanical applications, Key Engineering Materials Vol. 543 (2013) pp 43-46 (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/KEM.543.43
43. BORUTA, R., OLEJNIK, R., SLOBODIAN, P., RIHA, P.: Different Kinds of Carbon-Based Material for Resistive Gas Sensing, Key Engineering Materials, Vol. 543 (2013) pp 269-272 (2013) Trans Tech Publications,Switzerland,doi:10.4028/www.scientific.net/KEM.543.269
44. PETRAS, D., SLOBODIAN, P., OLEJNÍK, R., RIHA, P.: Temperature Dependence of Electrical Conductivity of Multi Walled Carbon Nanotube Networks in a Polystyrene Composite, Key Engineering Materials, Vol. 543 (2013) pp 356-359 (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/KEM.543.356
45. OLEJNIK, R., SLOBODIAN, P., CVELBAR, U., RIHA, P., SAHA P.: Plasma treatment as a way of increasing the selectivity of carbon nanotube networks for organic vapor sensing elements, Key Engineering Materials, Vol. 543 (2013) pp 410-413 (2013) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/KEM.543.410
46. TOUSEK, J.; TOUSKOVA, J.; REMES, Z.; CERMAK, J.; KOUSAL, J.; KINDL, D.; KURITKA, I. Exciton diffusion length and concentration of holes in MEH-PPV polymer using the surface voltage and surface photovoltage methods. Chemical Physics Letters, 2012, vol. 552, p. 49-52. ISSN 0009-2614.
47. GREGOROVA, A.; MACHOVSKY, M.; WIMMER, R. Viscoelastic Properties of Mineral-Filled Poly(lactic acid) Composites. International Journal of Polymer Science, 2012, vol. 2012, no. Article ID 252981, p. 6. doi:10.1155/2012/252981. ISSN 1687-9422.
48. CERNOCHOVA, J.; BRANNA, P.; ROUCHAL, M.; KULHANEK, P.; KURITKA, I.; VICHA, R. Determination of Intrinsic Binding Modes by Mass Spectrometry: Gas-Phase Behavior of Adamantylated Bisimidazolium Guests Complexed to Cucurbiturils. Chemistry-a European Journal, 2012, vol. 18, no. 43, p. 13633-13637. ISSN 0947-6539.
49. MACHOVSKY, M., KURITKA, I., KOZAKOVA, Z.: Microwave assisted synthesis of nanostructured Fe3O4/ZnO microparticles. Materials Letters, 2012, vol. 83, p. 31-34, ISSN 0167-577X, DOI: http://dx.doi.org/10.1016/j.matlet.2012.07.038. Type - Jimp
50. POPELKA, A., NOVAK, I., LEHOCKY, M., JUNKAR I., MOZETIC, M., KLEINOVA, A., JANIGOVA I., SLOUF, F., BILEK, F., CHODAK. I.: A new route for chitosan immobilization onto polyethylene surface. Carbohydrate Polymers, 2012, vol. 90, p. 1501-1508, ISSN 0144-8617. Type – Jimp
51. ASADINEZHAD, A., LEHOCKY, M., SAHA, P., MOZETIC, M.: Recent progress in surface modification of polyvinyl chloride, Materials, 2012, vol. 5, p. 2937-2959, ISSN 1996-1944. Type – Jimp
52. JELÍNKOVÁ, L., SVOBODA, P., SÁHA, P., and INOUE, T.: Kinetics of Coarsening in Immiscible Poly(rolactone)/Poly(styrene-co-acrylonitrile) Blends. Polymer Journal, 2012, vol. 44, no. 2, p. 155-161, DOI 10.1038/pj.2011.110, ISSN 0032-3896. Type - Jimp

Publications in peer-reviewed journals

1. SLOBODIAN, P., SVOBODA, P., RIHA, P., BORUTA, R., SAHA, P.: Synthesis of PMMA-co-PMAA Copolymer Brush on Multi-Wall Carbon Nanotubes, Journal of Surface Engineered Materials and Advanced Technology, 2012, vol. 2, p. 221-226, ISSN 2161-4881. DOI: http://dx.doi.org/10.4236/jsemat.2012.223034. Type - Jneimp
2. MORAVCIKOVA, D., KUCEKOVA, Z., MLCEK, J., ROP, O., HUMPOLICEK, P.: COMPOSITIONS OF POLYPHENOLS IN WILD CHIVE, MEADOW SALSIFY, GARDEN SORREL AND AG YONCHA AND THEIR ANTI-PROLIFERATIVE EFFECT. ACTA UNIVERSITATIS AGRICULTURAE ET SILVICULTURAE MENDELIANAE BRUNENSIS, 2012, vol. 60 (3), p. 125–132, ISSN 1211-8516, DOI: No type - Jneimp
3. STLOUKAL, P., KOUTNY, M., SEDLARIK, V., KUCHARCZYK, P..: Biodegradation of high molecular weight polylactic acid. AIP Conf. Proc. 1459, 20 (2012) p. 20-22, ISSN 1551-7616, DOI:http://dx.doi.org/10.1063/1.4738385. Type – Jneimp
4. GAREEV, K.G, GRACHEVA, I.E., KAZANTSEVA N.E., LUCHININ, V.V., MOSHNIKOV, V.A., PETROV, A.A.: Investigation of the products of sol-gel processes in multicomponent oxide systems proceeding with the formation of magnetic nanocomposites, Journal of and system ique, 2012, n. 10, p. 5-10. Type – Jneimp (published in the Russian language).
5. SPIVAK, Yu.M., MOSHNIOKOV,V.A., SAPURINA, I.Yu., KAZANTSEVA, N.E.: Atom force microscopy of polyaniline nanostructures, Biotehnosfera, 2012, vol. 19 (1), p. 7-12. Type – Jneimp (published in the Russian language).

Publications in national peer-reviewed journals

1. ROY, N., SAHA, N., JELINKOVA, L., SAHA, P., SAHA, T.: Inteligentní hydrogely. Plasty a kaučuk, 2012, vol. 3-4, p. 73-80, ISSN 0322-7340. Type - Jneimp
2. HRABALIKOVA, M. VALASEK, P. URBANKOVA, M. SEDLARIK, V. Antibacterial modifications of plastics with natural bioactive compounds. Plasty a kaučuk, 2012, p. 10-12. Druh Jrec
3. HUMPOLÍČEK, P., KAŠPÁRKOVÁ, V.: Polymerní materiály ve zdravotnických prostředcích a jejich biologické vlastnosti. Plasty a kaučuk. 2012. 7-8. 196-199.
4. KUCEKOVA, Z., HUMPOLICEK, P., KASPARKOVA, V., STEJSKAL, J.: Cytotoxicity of polyaniline precursors. Plasty a kaučuk. 2012. Special issue.
5. SEDLACIK, M.; ALMAJDALAWI, S.; MRLIK, M.; PAVLINEK, V.; KOZAKOVA, Z.; KURITKA, I. Electrorheological properties of suspensions of rod-like titanium oxide/polypyrrole particles. Plasty a kaučuk, 2012, vol. 49, no. 49, p. 33-35. ISSN 0322-7340.

Publications in non-peer-reviewed journals

1. OLEJNIK, R., SLOBODIAN, P., SAHA, P.: Multi-wall Carbon Nanotube Network Sensing Element for Organic Vapor Detection, Journal of Materials Science and Engineering A1 (2012), Formerly part of Journal of Materials Science and Engineering, ISSN 1934-8959.
2. OLEJNÍK, R., SLOBODIAN, P., RIHA, P., SAHA, P.: Selectivity of multi-wall carbon nanotube network sensoric units to ethanol vapors achieved by carbon nanotube oxidation, Journal of Materials Science Research, Vol. 1, No. 1; January 2012.

Papers in scientific publications – Accepted – In print

1. SEDLACIK, M., MRLIK, M., KOZAKOVA, Z., PAVLINEK, V., KURITKA , I.: Synthesis and electrorheology of rod-like titanium oxide particles prepared via microwave-assisted molten-salt method. Colloid and Polymer Science, in Press, p. 1-7.
2. BERNAL, A., KURITKA, I., KASPARKOVA, V., SAHA, P.: The effect of microwave irradiation on poly(vinyl alcohol) dissolved in ethylene glycol. Journal of Applied Polymer Science, in Press.
3. BERNAL, A., BALKOVA, R., KURITKA, I., SAHA, P.: Preparation and characterisation of a new double-sided bio-artificial material prepared by casting of poly(vinyl alcohol) on collagen. Polymer Bulletin, in Press, p. 1-23.
4. SEDLACIK, M., MOUCKA, R., KOZAKOVA, Z., KAZANTSEVA, N. E., PAVLINEK, V., KURITKA, I., KAMAN, O., PEER, P.: Correlation of structural and magnetic properties of Fe3O4 nanoparticles with their calorimetric and magnetorheological performance. Journal of Magnetism and Magnetic Materials, 2013, vol. 326, p. 7-13. ISSN 0304-8853.
5. POLASKOVA, M., CERMAK, R., VERNEY, V., PONIZIL, P., COMMEREUC, S., GOMES, M. F. C., PADUA, A. A. H., MOKREJS, P., MACHOVSKY, M.: Preparation of microfibers from wood/ionic liquid solutions. Carbohydrate Polymers, 2013, vol. 92, no. 1, p. 214-217.
6. BERNAL, A., KURITKA, I., SAHA, P.: Preparation and characterization of poly(vinyl alcohol)-poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications. Journal of Applied Polymer Science, 2013, vol. 127, no. 5, p. 3560-3568.
7. BABAYAN, V., KAZANTSEVA, N.E., SAPURINA, I., MOUČKA, R., STEJSKAL, J., SÁHA, P.: Increasing the high-frequency magnetic permeability of MnZn ferrite in polyaniline composites by incorporating silver. Journal of Magnetism and Magnetic Materials, 2013, vol. 333, p. 30-38.

Chapters in books

1. KAZANTSEVA, N. E.: Magnetic Particle-Filled Polymer Microcomposites. Edited: SABU, T., KURUVILLA, J., MALHOTRA, S. K., KOICHI, G., SREEKALA, M. S.: Polymer Composites, 2012, vol. 1, p. 613-672, ISBN 978-3-527-32624-2. Type - C
2. ROY, N., SAHA, N.: PVP-Based hydrogels: Synthesis properties and applications. Edited by: F. V. Camara and L. J. Ferreira, Hydrogels: Synthesis, Characterization and Applications, Chapter 8, 228-252 2012, ISBN 978-1-61942-842-3. ) Nova Science Publishers, Inc, Type - C (Book chapter).

Papers in international conference proceedings

1. KOLARIK, R., ZATLOUKAL, M.: Variational Principle based Modeling of Film Blowing Process for LDPE Considering Non-Isothermal Conditions and Non-Newtonian Polymer Melt Behavior. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
2. KOLARIK, R., ZATLOUKAL, M.: Investigation of Polymer Long Chain Branching of Film Blowing Process Stability by using Variational Principle. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
3. SAMBAER, W., ZATLOUKAL, M., KIMMER, D.: Investigation of Filtration Efficiency of Nanofiber Based Filters in Ultrafine Particles Range during Cake Formation. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
4. SAMBAER, W., ZATLOUKAL, M., KIMMER, D.: Determination of Pressure Drop and Filtration Efficiency of Filled Nanofiber Based Filters by using 3D Filtration Model. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
5. MUSIL, J., ZATLOUKAL, M.: On Formation Mechanism of Die Drool and Slip-stick Phenomena during Linear Polymer Melt Extrusion. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
6. MUSIL, J., ZATLOUKAL, M.: Flow Induced Molecular Weight Fractionation during Capillary Flow of Linear Polymer Melt. In: Recent Advances in Fluid Mechanics, Heat & Mass Transfer and Biology - 9th WSEAS International conference, USA, 2012, ISBN 978-1-61804-065-7. Type - D
7. SAMBAER, W., ZATLOUKAL, M., KIMMER, D.: Air filtration modelling through polymeric nanofiber based filters. In: 11th World Filtration Congress, Graz, Austria, 2012, ISBN 978-3-941655-04-1. Type - D
8. OLEJNIK, R., SLOBODIAN, P., ALMAJDALAWI, S.: Thin sensitive layer base on Multiwalled carbon nanotubes/polypyrrole composites as a potential gas sensor. In: WSEAS, SENSING 12, Malta, p. 82 - 86, ISBN: 978-1-61804-119-7. Type - D
9. PETRAS, D., SLOBODIAN, P., OLEJNIK, R., RIHA, P.: Improved electro-mechanical properties of carbon nanotubes network embedded in elastic polyurethane by oxidation, In: WSEAS, SENSING 12, Malta, p. 73 - 76, ISBN: 978-1-61804-119-7. Type - D
10. ZATLOUKAL, M., MUSIL, J.: Investigation of die drool phenomenon for linear HDPE polymer melts having identical polydispersity index but different Mz and Mz+1 average molecular weights. In: Annual Technical Conference - ANTEC, Conference Proceedings, 2012, Florida, vol. 2, p. 1088-1093, ISBN 978-162276083-1. http://www.proceedings.com/15112.html Type - D
11. ZATLOUKAL, M., SAMBAER, W., KIMMER, D.: Investigation of air filtration efficiency for nanofiber based filters in ultrafine particle size range. In: Annual Technical Conference - ANTEC, Conference Proceedings, 2012, Florida, vol. 1, p. 838-843, ISBN 978-162276083-1. http://www.proceedings.com/15112.html Type - D
12. ZATLOUKAL, M., KOLARIK, R.: Investigation of processing and rheological parameters effect on film blowing process stability by using variational principles. In: Annual Technical Conference - ANTEC, Conference Proceedings, 2012, Florida, vol. 2, p. 1094-1102, ISBN 978-162276083-1. http://www.proceedings.com/15112.html Type - D
13. ZATLOUKAL, M.: Measurement and modeling of planar and uniaxial extensional viscosities for LDPE polymer melt. In: Annual Technical Conference - ANTEC, Conference Proceedings, 2012, Florida, vol. 1, p. 66-70, ISBN 978-162276083-1. http://www.proceedings.com/15112.html Type - D
14. SEDLACEK, T., HAUSNEROVA, B., FILIP, P.: Viscosity Measurements of Polyphenylsulfone Melt. In: WSEAS, 2012, Greece, p. 429-431, ISBN: 978-1-61804-110-4 Type - D
15. KIMMER, D., FENYK, J., CHMELOVSKY, J., ZATLOUKAL, M., SLOBODIAN, P., VALASKOVAC, M., HUNDAKOVA, M., HOLESOVA, S., CECH BARABASZOVA, K.: Dispergace vermikulitů v polymerní matrici a charakterizace vybraných vlastností připravených kompozitů. In: Conference PLASTKO, Zlin, p. 36 - 60, ISBN 978-80-7454-137-7. Type - D
16. PIYAMANOCHA, P., SEDLACEK, T., CHUAPON, N., SAHA, P.: High Molecular Weight and High Melt Strength PP Blends Foaming. In: Conference PLASTKO 2012, Zlin, p. 208 - 214, ISBN 978-80-7454-137-7. Type – D
17. BERNAL, A., KURITKA, I. SAHA, P.: Characterisation of a cross-linked material with medical purposes: Poly(vinyl alcohol)-poly(vinyl pyrrolidone) blend. In: Conference PLASTKO 2012, Zlin, p. 215 - 219, ISBN 978-80-7454-137-7. Type - D
18. PIYAMANOCHA, P., SEDLACEK, T., CHUAPON, N., SAHA, P.: High Molecular Weight and High Melt Strength PP Blends Foaming. In: Conference PLASTKO 2012, Zlin, p. 208 - 214, ISBN 978-80-7454-137-7. Type - D
19. BERNAL, A., KURITKA, I. SAHA, P.: Characterisation of a cross-linked material with medical purposes: Poly(vinyl alcohol)-poly(vinyl pyrrolidone) blend. In: Conference PLASTKO 2012, Zlin, p. 215 - 219, ISBN 978-80-7454-137-7. Type - D
20. SEDLACIK, M. PAVLINEK, V. MRLIK, M., KOZAKOVA, Z., KURITKA, I., SAHA, P.: Electrorheological properties of suspensions of TiO2 rod-like particles in silicone oil. In: Conference PLASTKO 2012, Zlin, p. 220 - 224, ISBN 978-80-7454-137-7. Type - D
21. HRABALIKOVA, M., VALASEK, P., URBANKOVA, M., SEDLARIK, V.: Antimicrobial modifications of polyethylene with terpenoids. In: Conference PLASTKO 2012, Zlin, p. 229 - 234, ISBN 978-80-7454-137-7. Type - D
22. URBANEK, P., KRCMAR, P., KURITKA, I.: The Influence of Process Conditions on the Thickness and Photoluminescence of the PMPSi Thin Films. In: Conference PLASTKO 2012, Zlin, p. 236 - 239, ISBN 978-80-7454-137-7. Type - D
23. KUCHARCZYK, P., MISKOLCZI, N., SZAKACS, H., KITANO, T., SEDLARIK, V.: Mechanical properties enhancement of partially biodegradable polyamide/polylactide blends through compatibilization with newly developed additives. In: Conference PLASTKO 2012, Zlin, p. 259 - 265, ISBN 978-80-7454-137-7. Type - D
24. ILCIKOVA, M., MOSNACEK, J., MRLIK, M., SEDLACEK, T., CHORVAT, D., KRUPA, I., KOYNOV, K.: Physical Properties of Composites Based on Covalently Modified Carbon Nanotubes and Styrene-Isoprene-Styrene block copolymer. In: Conference PLASTKO 2012, Zlin, p. 286 - 293, ISBN 978-80-7454-137-7. Type - D
25. MRLIK, M., PAVLINEK, V., ALMAJDALAWI, S., SAHA, P., STEJSKAL, J.: Electrorheological behaviour of suspensions of aniline oligomers under electric field. In: Conference PLASTKO 2012, Zlin, p. 300 - 306, ISBN 978-80-7454-137-7. Type - D
26. SEDLACIK, M., MRLIK, M., PAVLINEK, V., SAHA, P. STEJSKAL, J.: Electrorheological properties of suspensions of composite particles (carbon/polyaniline) in silicone oil. In: Conference PLASTKO 2012, Zlin, p. 345 - 350, ISBN 978-80-7454-137-7. Type – D
27. STEPANOVA, I. S., KAZANTSEVA, N. E., MOUCKA, R., BABAYAN, V., VILCAKOVA, J., SAHA, P.: Iron oxide nanoparticles as heat mediators in magnetic-mediated hyperthermia. In: Plastko 2012, April 11th-12th 2012, Zlin, Czech Republic, ISBN 978-80-7454-1357-7.
28. KUTEJOVA, L. VILCAKOVA, J., KAZANTSEVA, N. E., MOUCKA, R.: Epoxy – elastomer polymer system: Regulation of physico – mechanical properties. In: Plastko 2012, April 11th-12th 2012, Zlin, Czech Republic, ISBN 978-80-7454-1357-7.
29. KAZANTSEVA, N. E., STEPANOVA, I. S., MOUCKA, R., BABAYAN, V., VILCAKOVA, J., SAHA, P.: Iron oxides nanoparticles for magnetic mediated hyperthermia. In: Drug Delivery Devices, Medical Plastics, October 9th-10th 2012, Copenhagen, Denmark, ISBN 87-89753-65-8.
30. KUTEJOVA, L. VILCAKOVA, J., KAZANTSEVA, N.: Morphology and miscibiluity of epoxy – elastomer polymer system as a matrix for conductive composites. In: BYPOS
2012, October 1st-5th 2012, Liptovský Ján, Low Tatras, Slovakia. ISBN 978-80-970923-2-0.
31. VILCAKOVA, J., BABAYAN, V., KAZANTSEVA, N, MOUCKA. R., SAPURIBA, I. STEJSKAL, J.: Morphology and miscibiluity of epoxy – elastomer polymer system as a matrix for conductive composites. In: BYPOS 2012, October 1st-5th 2012, Liptovský Ján, Low Tatras, Slovakia. ISBN 978-80-970923-2-0.
32. BABAYAN, V., KAZANTSEVA, N., VILCAKOVA, J., MOUCKA, R., SAHA, P.: The effect of polyaniline coating on the magnetic properties of manganese-zinc-polyaniline corell composites. In: PLASTKO 2012, April 11th-12th 2012, Zlin, Czech Republic, ISBN 978-80-7454-1357-7.
33. SEDLAK, J., PASTOREK, M., KURITKA, I.: Preparation of Surface Modified Zinc Oxide Microparticles. In: Conference PLASTKO 2012, Zlin, p. 225 - 228, ISBN 978-80-7454-137-7.
34. PETRAS, D., SLOBODIAN, P, OLEJNIK, R., RIHA P.: Temperature Dependence of Electrical Conductivity of Multi-Walled Carbon Nanotube Networks in a Polystyrene Composite, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
35. SLOBODIAN, P., RIHA, P., SAHA, P.: Entangled Network of Carbon Nanotubes Embedded in Polyurethane and its Use for Body Kinematics and Joint Flexion Sensing, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
36. BORUTA, R., OLEJNIK, R., SLOBODIAN, P., RIHA, P.: Different Kinds of Carbon-Based Material for Resistive Gas Sensing, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
37. BORUTA, R., SLOBODIAN, P., OLEJNIK, R., MACHOVSKY, M., RIHA, P.: Improvement of strain sensing element based on the carbon nanotube network by KMnO4 oxidation, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
38. OLEJNIK, R., SLOBODIAN, P., CVELBAR, U., RIHA, P., SAHA, P.: Plasma treatment as a way of increasing the selectivity of carbon nanotube networks for organic vapor sensing elements, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
39. LENGALOVA, A., SLOBODIAN, P., OLEJNIK, R., RIHA P.: A pressure sensing conductive polymer composite with carbon nanotubes for biomechanical applications, May 24-28, 2012, Budapest, Hungary International Conference on Materials and Applications for Sensors and Transducers, ISBN 978-3-03785-616-1.
40. MUNSTER, L., KLOFAC, J., SEDLAK, J., BAZANT, P., MACHOVSKY, M., KURITKA, I.: Microwave Assisted Modification of Bio-Template by Ag-ZnO Sub-Microparticles. In: Nanocon Conference 2012, Brno, p. 119, ISBN 978-80-87294-32-1.
41. BAZANT, P., KOZAKOVA, Z., KURITKA, I., MACHOVSKY, M.: Microwave Assisted Hydrothermal Synthesis of Ag-ZnO Nano-Micro-Structures: Comparison of Closed and Open Vessel Reactor Influence on Nitrate Solution Preparation Route. In: Nanocon Conference 2012, Brno, ISBN 978-80-87294-32-1.
42. KLOFAC, J., MUNSTER, L., BAZANT, P., SEDLAK, J., KURITKA, I.: Preparation of Flower-Like ZnO Microparticles by Microwave Assisted Synthesis. In: Nanocon Conference 2012, Brno, ISBN 978-80-87294-32-1.
43. KOZAKOVA, Z., KURITKA, I., BAZANT, P., MACHOVSKY, M., PASTOREK, M., BABAYAN, V.: Simple and Effective Preparation of Cobalt Ferrite Nanoparticles by Microwave Assisted Solvothermal Method. In: Nanocon Conference 2012, Brno, ISBN 978-80-87294-32-1.
44. URBANEK, P., KURITKA, I., KRCMAR, P. MASLIK, J., BARTOS, J.: Polysilanes Thin Films Doped by Coumarin. In NANOCON 2012 Conference 2012, Brno, ISBN 978-80-87294-32-1.
45. KRCMAR, P., URBANEK, P., KURITKA, I., MASLIK, J., BARTOS, J.: The Effect of The Exalite on Photoluminescence of Poly(methylphenylsilane) in Thin Films. In NANOCON 2012 Conference 2012, Brno, ISBN 978-80-87294-32-1.
46. URBANEK, P., KRCMAR, P., KURITKA, I.: The Influence of Process Conditions on the Thickness and Photoluminescence of the PMPSi Thin Films. In Plastko 2012 Conference, 2012, Zlín, p.236-239. ISBN 978-80-7454-137-7,
47. KRCMAR, P., URBANEK, P., KURITKA, I.: The Influence of the Substrate Surface on Deposition of Thin Layers from PEDOT: PSS. In Plastko 2012 Conference, 2012, Zlín, p. 307-311. ISBN 978-80-7454-137-7,
48. HUDECEK, O., SEDLACEK, T., SAHA, P.: Plasma polymerised hexamethyldisiloxane (HMDSO) barrier layers on polymeric foil material: Plastko, Zlín, pp. 317 - 322, 2012, ISBN 978-80-210-5979-5.
49. HUDECEK, O., RAFAJOVA, M., SEDLACEK, T.: Preparation and Characterization of Plasma Polymerized Thin Silica Layers on Polymeric Substrate, WSEAS Int. Conf. on CM-WHH-GES'12, pp. 432 - 435, 2012, ISBN 978-1-61804-110-4.
50. HUDECEK, O., SEDLACEK, T., CVELBAR, U., JUNKAR, I.: Atmospheric pressure PECVD of SiOx coatings at low temperature using HMDSO/N2, 69th IUVSTA Workshop "Oxidation of Organic Materials by Excited Radicals Created in Non- Equilibrium Gaseous Plasma", 2012.

Invited lectures

1. SAHA, P.: Applied rheology of nanofiber based filters Portoroz, Slovenia, 16th IWAEM (International Workshop on Advances in Experimental Mechanics), 19 -25 August 2012,
2. SAHA, N.: Agriculturally important microbes and scope of their improvement using biotechnology Ramkrishna Mission Vivekananda University, IRDM Faculty, Narendrapur, Kolkata, West Bengal, India, 23 June 2012

Updated: 9 Apr 2013, by kremplova@rektorat.utb.cz

info@ft.utb.cz